Olympus TL-Lite Instruction Manual - Page 4

Browse online or download pdf Instruction Manual for Camera Accessories Olympus TL-Lite. Olympus TL-Lite 7 pages. Intervalometer

Print Page

Selecting a preset

Press and hold the centre and right buttons then press and release the left button.

The led will now flash 3 times with a rapid pulse.

Releasing the centre and right buttons during the first flash will select preset 1.

Releasing the centre and right buttons during the second flash will select preset 2.

Releasing the centre and right buttons during the third flash will select preset 3.

Selecting a memory

There are five memories in the unit.

After a preset has been selected memory 1 is selected by default.

Pressing and holding the centre button then pressing and releasing the left button will increment

the selected memory the led will flash indicating the memory selected.

After selecting memory 5 the unit will loop back to memory 1.

User delay setup

Press and hold the right button then press and release the left button.

The green led will now be on indicating that the unit is ready to record a user delay.

The delay starts when you release the right button and stops when you press the right button.

After you release the right button the green led will flash every second, you can either count the

flashes or use a clock with seconds to set the delay.

After pressing the right button to set the delay the first shutter trigger will be sent.

You can set a delay of between 1 second and 960 seconds (16 minutes)

To set a longer delay you can press the centre button instead of the right button this will set the

delay to 10 times your user delay.

If you wait 10 seconds then press the right button you will get 10 seconds if you wait 10 seconds

then press the centre button you will get 100 seconds.

So you can set delay of between 10 seconds and 9600 seconds (160 minutes).

You can set a different user delay in each of the five memories.

User delays will be lost if you reload a delay preset.