Olympus EMPOWER EMP-H100S Quick Reference Manual - Page 4

Browse online or download pdf Quick Reference Manual for Medical Equipment Olympus EMPOWER EMP-H100S. Olympus EMPOWER EMP-H100S 10 pages. Yag lasers

Olympus EMPOWER EMP-H100S Quick Reference Manual
Check rear power switch
Check the rear power switch ensuring it is flipped to the active ("I") position.
n
H35 Rear Panel
Turn the unlock key to start the device
M ake sure the red emergency stop button is not pressed. To reset the emergency stop button, turn the
n
knob clockwise.
T he unlock key turns the device on and off. To switch the device ON, insert the key and turn it clockwise,
n
90 degrees, to the vertical position. The ring around the fiber connection will light up (white on the H35
and blue on the H65 and H100) to indicate the system is powering on.
The Laser will run a self-check of all system components. If an error occurs during start up, the laser will
n
display an error code. If this occurs, restart the device. If the error still remains, contact Olympus Service.
Once the system check is complete, the home screen will load.
Only the H65 and H100 show a System Check Screen
4
E M P -H 35 S , EM P- H 6 5S & E M P - H 1 0 0 S Q U I C K R E FE RE N CE GU ID E
L A S E R O P E R A T I O N
H65 & H100 Rear Panel
Turn
clockwise,
90°