Olympus SZ2-ILLC Instructions Manual - Page 13

Browse online or download pdf Instructions Manual for Medical Equipment Olympus SZ2-ILLC. Olympus SZ2-ILLC 16 pages. Coaxial illuminator
Also for Olympus SZ2-ILLC: Instructions Manual (16 pages)

Print Page

1. Assembly

Fig. 1

Installing the Coaxial Illuminator

# If a auxiliary objective is attached, remove it.

1. Screw the mount adapter 2 fully into the bottom of the SZ2 series micro-

scope body 1 by turning the mount adapter in the direction of the arrow.

2. Loosen the clamping screw 3 of the SZ2-ILLC coaxial illuminator, fit the

illuminator into the mount adapter 2 and tighten the clamping screw

again.

# Make sure that the SZ2-ILLC is installed correctly in the frontward

orientation. Otherwise, it would be impossible to attach the light guide.

Attaching the Light Guide

1. Using the Allen wrench provided with the SZ2-ILLC, loosen the clamping

screw 4 of the light guide mount port and insert the output end of the

light guide all the way into it.

2. Tighten the clamping screw 4.

SZ2-ILLC

(Fig. 1)