Olympus CIX100 Systems Setup Manual - Page 17
Browse online or download pdf Systems Setup Manual for Laboratory Equipment Olympus CIX100. Olympus CIX100 38 pages. Cleanliness inspector system
Also for Olympus CIX100: Installation Manual (14 pages), Instructions Manual (46 pages)
Print Page
Connecting the camera to the computer
1. Plug the camera's USB-3.0 cable into the computer's USB-3.0 PCI
express card port. The camera's cable is located above the vertical
illuminator.
Figure 10: Camera cable and computer port
Connecting the stage to the microscope and the computer
1. Plug the motor cable 2 (Y) into the y port on the microscope.
2. Plug the motor cable 1 (X) into the x port on the microscope.
3. Plug the motor cable 3 (Z) into the motorized focus drive's port on the
microscope.
Figure 11: Motor cables and microscope ports
17
OLYMPUS Cleanliness Inspector CIX100
4 Setting up the system
System Setup Guide