Olympus CKX-NU Instructions Manual - Page 33

Browse online or download pdf Instructions Manual for Laboratory Equipment Olympus CKX-NU. Olympus CKX-NU 36 pages. Reflected fluorescence system

Olympus CKX-NU Instructions Manual

PROPER SELECTION OF THE POWER SUPPLY CORD

If no power supply cord is provided, please select the proper power supply cord for the equipment by referring
to " Specifications " and " Certified Cord " below:
CAUTION: In case you use a non-approved power supply cord for Olympus products, Olympus can
no longer warrant the electrical safety of the equipment.
Voltage Rating
Current Rating
Temperature Rating
Length
Fittings Configuration
A power supply cord should be certified by one of the agencies listed in Table 1 , or comprised of cordage
marked with an agency marking per Table 1 or marked per Table 2. The fittings are to be marked with at least
one of agencies listed in Table 1. In case you are unable to buy locally in your country the power supply cord
which is approved by one of the agencies mentioned in Table 1, please use replacements approved by any
other equivalent and authorized agencies in your country.
Country
Agency
Argentina
IRAM
Australia
SAA
Austria
ÖVE
Belgium
CEBEC
Canada
CSA
Denmark
DEMKO
Finland
FEI
France
UTE
Germany
VDE
Ireland
NSAI
Specifications
125V AC (for 100-120V AC area) or, 250V AC (for 220-240V AC area)
6A minimum
60°C minimum
3.05 m maximum
Grounding type attachment plug cap. Opposite terminates in molded-on
IEC configuration appliance coupling.
Table 1 Certified Cord
Certification
Country
Mark
Italy
Japan
Netherlands
Norway
Spain
Sweden
Switzerland
United
Kingdom
U.S.A.
REFLECTED FLUORESCENCE SYSTEM
Agency
IMQ
JET, JQA , TÜV,
UL-APEX / MITI
KEMA
NEMKO
AEE
SEMKO
SEV
ASTA
BSI
UL
FOR CKX41
Certification
Mark
30