Olympus SZX2-ILR66 Instructions Manual - Page 5

Browse online or download pdf Instructions Manual for Laboratory Equipment Olympus SZX2-ILR66. Olympus SZX2-ILR66 28 pages. Led four-part ring illuminator system

Print Page

Getting Ready

1. The LED Four-Part Ring Illuminator System is a precision instrument. Handle it with care and avoid subjecting it to sudden

or severe impact.

2. Do not use the LED Four-Part Ring Illuminator System where it may be subjected to direct sunlight, high temperatures and

humidity, dust or vibrations (for the operating environment, see Chapter 5, "SPECIFICATIONS" on page 17).

3. Applicable microscopes are as follows.

SZX16

SZX10/7:

Use the SZX-LGR66 adapter.

SZ61/51 series: Use the SZ-LGR66 adapter.

MVX10:

Use the SZX-LGR66 adapter.

STM6 series

Use the SZX-LGR66 adapter.

4. The full illumination performance cannot be manifested when an optional auxiliary objective for the SZ61/51 series or a

low-power objective for the SZX16/10 is used (see pages 13, 1 4 for details).

5. Take the following care when using the STM6 series because measurement accuracy is affected even by slight heat

generation of the LED.

If he intensity of the illumination is expected to be changed widely (minimum

going to take long, keep the illumination in the maximum condition for about an hour before using the system.

6. Variance in phase may be produced due to variance of individual LEDs.

LED FOUR-PART RING ILLUMINATOR SYSTEM

maximum) when the measurement is