Olympus U-RFLT50 Instructions Manual - Page 4
Browse online or download pdf Instructions Manual for Laboratory Equipment Olympus U-RFLT50. Olympus U-RFLT50 16 pages. Power supply unit
Also for Olympus U-RFLT50: Instructions Manual (36 pages)
Print Page
- 1. Table of Contents
- 1. 2 Assembly
- 1. Assembly Diagram
- 1. Mounting the Mercury Burner
- 1. Setting the Voltage Selector Switch
- 1. Connecting Cords and Cables
- 2. 3 Preparation for Observation
- 2. Turning on the Mercury Burner
- 2. Centering the Mercury Burner
- 3. 4 Specifications
- 4. 5 Troubleshooting Guide
- 4. Proper Selection of the Power Supply Cord
2
Maintenance and Storage
1. To clean the lenses and other glass components, simply blow dirty away using a commercially available blower and
wipe gently using a piece of cleaning paper (or clean gauze).
If a lens is stained with fingerprints or oil smudges, wipe it gauze slightly moistened with commercially available absolute
alcohol.
Since the absolute alcohol is highly flammable, it must be handled carefully.
Be sure to keep it away from open flames or potential sources of electrical sparks --- for example, electrical
equipment that is being switched on or off.
Also remember to always use it only in a well-ventilated room.
2. The mercury burner has a service life of approx. 100 hours. When the hour counter on the power supply unit indicates
100 hours, replace the burner with a new one. (See page 3.)
3. If a dichroic mirror cube is not going to be used for a while, place it in its container and store it in a safe place.
3
Caution
If the attachment is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition,
the equipment may also be damaged. Always use the equipment as outlined in this instruction manual.
The following symbols are used to set off text in this instruction manual.
: Indicates that failure to follow the instructions in the warning could result in bodily harm to the
user and/or damage to equipment (including objects in the vicinity of the equipment).
# : Indicates that failure to follow the instructions could result in damage to equipment.
} : Indicates commentary (for ease of operation and maintenance).
Compliance
This device complies with the requirements of both directive 2004/108/EC concerning electromagnetic
compatibility and directive 2006/95/EC concerning low voltage. The CE marking indicates compliance
with the above directives.
Safety and EMC Precautions
1. Use only power cord which OLYMPUS specifies. Otherwise the safety and EMC performance of the product
can not be assured.
2. Be sure to ground the product. Otherwise our intended electric safety and EMC performance of the product
can not be assured.
iii