Olympus U-UCD8 Instructions Manual - Page 34

Browse online or download pdf Instructions Manual for Laboratory Equipment Olympus U-UCD8. Olympus U-UCD8 40 pages. Universal condenser

Print Page

5-3 Mounting the Condenser

3 1

Fig. 12

Also refer to the instruction manual for the microscope in use.

Attach the condenser to the condenser holder in accordance

with the following procedure.

1. Rotate the coarse adjustment knob @ to raise the stage to a

height where it does not hit the objective. Then rotate the

condenser height adjustment knob ² on the microscope to

lower the condenser holder to the position of the lowest stop-

per.

2. Loosen the clamping knob ³ on the right side of the con-

denser holder.

3. Swing out the top lens of the condenser.

4. Insert the condenser in the mounting dovetail of the condenser

holder, and press horizontally until the positioning pin of the

condenser is engaged in the positioning groove of the mount-

ing dovetail.

5. Tighten the clamping knob ³ on the right side of the con-

denser holder.

6. Raise the condenser holder by rotating the condenser height

adjustment knob ².

(Fig. 12)