Axminster BS100 Manual - Page 14

Browse online or download pdf Manual for Sander Axminster BS100. Axminster BS100 17 pages. Belt sander

Print Page

6.3 Trial running

Before using the machine, the insulation resistance between parts and outside

cover must be measured. Refer to EN 60204-1:2006 for detail information.

- Ensure the stability of the machine before using the machine.

- Turn the band wheel and other parts by hand to watch whether it feels

smoothly and deftly, and listen whether there is bumping sound. After making

sure that all parts are in normal conditions, the machine can be started.

Check the following functions:

The belt moves freely by pressing the belt with hand.

The belt does not touch the grinding supports.

Make sure that the running belt has the correct rotation direction. If the rotation direction is

not correct, please change it by the plug with the function of phase changer.

Operate the machine according to the instruction handbook!

- Stop the machine when emergency!

- Only the qualified persons should be permitted to operate the machine.

- Wear eye and ear protection at all times. If necessary, wear mask during

operation!

- The number of granularity of sand-band is to be selected higher when higher

polishing quality is needed. Otherwise the number of granularity can be lower.

- Contacting parts to be processed near sand-band slowly, then exert force

evenly.

- Keep other no-using workzone guards closed when grinding!

Plug, stop&start button

14 / 16

Belt tension release lever