Axminster Trade DS12DLMB Quick Start Manual - Page 10

Browse online or download pdf Quick Start Manual for Sander Axminster Trade DS12DLMB. Axminster Trade DS12DLMB 17 pages. 300mm disc sanders

Print Page

Changing the Sanding Disc

DISCONNECT THE SANDER FROM

THE MAINS SUPPLY BEFORE

CONTINUING!

Fig 10

Step 1 Remove the two table clamping handles (see fig 10).

Fig 11

Step 2 Remove both Phillips screws on either side of the

table and place safely aside (see fig 11).

Fig 12

Step 3 Lift the table assembly away and place to one side

(see fig 12).

Step 4 Locate the supplied spanner (C) and using the 10mm

end remove the two nuts on either side of the extraction

housing (see fig 13)

Step 5 Lower the extraction housing (see fig 14).

Step 6 Grip the edge of the adhesive disc and peel away

from the plate; turning the plate as required to free the

entire disc (see fig 15). Clean the surface of the disc with a

de-greasing cleaner. Allow to dry off and wipe over with a

Fig 13

Fig 14

Fig 15