Alphasmart NEO 1 Setup Manual

Browse online or download pdf Setup Manual for Software Alphasmart NEO 1. Alphasmart NEO 1 12 pages. Smartoption mobile lab
Also for Alphasmart NEO 1: Setup Manual (10 pages)

Print Page

MART

PTION

H o w t o S e t U p t h e S m a r t O p t i o n M o b i l e L a b

Consider labeling

your NEOs, the slots

in the cart, and the

cables. For labeling ideas and

other teacher tips, see

page 11.

SmartOption Mobile Lab

Setup for NEOs

OBILE

™

Your SmartOption Mobile Lab comes with AlphaHub™ and all cables already

installed. Follow these steps to set up the mobile lab. Do not connect the lab to your

computer until you have installed AlphaSmart™ Manager software on the computer.

For the computer's system requirements, go to www.renlearn.com/requirements.

1. Unpack the SmartOption Mobile Lab. Remove all packing materials from the

outside of the cart.

2. Plug in the lab. Find the power supply cord coming out the back of the cart.

Remove any tape or ties from the cord, and plug it directly into a 120-volt outlet

rated for at least 15 amps. Do not use an extension cord or a power strip.

3. Install the AlphaSmart Manager software on your computer. Find the

AlphaSmart Manager CD that came with your SmartOption Mobile Lab. Follow the

instructions in the AlphaSmart Manager User Manual or in the Quick Guide for your

NEOs to install the software on your computer.

4. Provide power to the computer through the lab (optional). If you'd like your

computer to receive power through the lab, do this:

a. Place the computer on top of the cart.

b. In the middle of the top of the cart (toward the back), remove the cable cap.

c. Pass the computer's power cord down through the opening.

d. Pull the computer's power cord (

in the bottom of the cart (in the middle of the back of the cart, behind the

NEO bays). Plug the computer's power cord into the power strip.

e. On the top of the cart, put the cable cap back on.

You can also plug a printer into the cart's power strip.

NEO

ETUP FOR

on the next page) down to the power strip

R42798

R0311.1008