Axor 15100XX1 Installation Instructions / Warranty - Page 4

Browse online or download pdf Installation Instructions / Warranty for Plumbing Product Axor 15100XX1. Axor 15100XX1 8 pages. Axor - hansgrohe, inc. electronic faucet installation instructions / warranty

Model 15101XX1
Turn on the water supplies (1).
Remove the protective cover from the
sensor (2). Wait 15 seconds (3).
Place your hand in front of the sensor
to turn the water on (4). Check the
temperature of the water.
If adjustment of the temperature is
necessary, turn the water off at the
supplies (1). Remove the set screw
from the rear of the faucet using a
2.5 mm allen wrench (2).
Pull the faucet housing off (1).
Use a slot-head screwdriver to adjust
the temperature control screw (2).
Turn it clockwise to make the water
warmer, counter-clockwise to make
the water cooler.
Re-assemble the faucet and turn the
water on. Test again. Repeat the
process if necessary until the desired
temperature is reached.
Clean the Sink
Cover the sensor for 5 seconds (1). The
faucet will be shut off for approximately
75 seconds to permit cleaning (2).
4