Cinegears 600MP Instruction Manual - Page 13

Browse online or download pdf Instruction Manual for Microphone system Cinegears 600MP. Cinegears 600MP 20 pages. Wireless video transmission system

Print Page
Installation
1) Ensure the video source output of the camera is OK, and the HD monitor is
powered on and switched to connected video input port.
2) Ensure 2 TX antennas are installed. For optimal results set the dual
antennas in the form of a "V" and maintain unobstructed line of sight
between transmitter and receiver. Below figure for your reference:
3) Ensure all input, output SDI or HDMI cables are connected.
4) Ensure both transmitter and receiver are powered via battery or DC input. Then
turn on power switch of the transmitter and receiver respectively. The screen will
light.
5) Ensure the transmitter and receiver is set with the same frequency.
6) If the camera is on and video input is OK, TX screen will show HDMI or SDI.
8