ARC WBT-913 Manual - Page 4

Browse online or download pdf Manual for Switch ARC WBT-913. ARC WBT-913 5 pages. Wireless 2 channel wall switch module

Print Page

Switch 2: Wire '

' intro S1 output port 'L1' of the light switch.

aring:

Pairing using LEARNING MODE:

1. First choose the desired receiver(s) that you wish to control.

2. Press the 'Learn' button once (LED will flash), this will now enter learning mode.

3. On the wall switch press the 'ON' button intended to be paired; the load will flash twice to

confirm that the remote control is now paired.

NOTE: Learning mode lasts for 12 seconds; if no signal is given to the receiver then it will

automatically exit learning mode without pairing the device.

To exit learning mode manually, simply press the 'Learn' button again.

！If, during learning mode the load does not flash to confirm, this means that the receiver's memory

is FULL and no further wall switch may be paired unless one of the existing wall switch is first

unpaired (see below).

nparing:

Removing single device:

1. With the receiver that you intent to un-pair press the 'Learn' button once (LED will flash), this

will now enter learning mode.

Version 1.