Cini QSO 150 Technical Instructions - Page 3

Browse online or download pdf Technical Instructions for Heater Cini QSO 150. Cini QSO 150 6 pages. Immersing heater with electronic thermostat

Print Page

4.2.4. User interface

4.2.4.1 testing program - self test – after connecting to the network all led lights will light up at the preset

sequence with the aim of checking all functions as well as the presence of required elements.

After the self test, if operating conditions are met, the thermostat will activate the

the indicator (4).

If all led lights are flashing simultaneously, there is a problem with the temperature sensor

function. It is necessary to check the connection between the heating element and the

thermostat.

4.2.4.2 Sensors – contactless controls (5, 6)

Touching the marked spot of the sensor with your thumb, you will activate the following functions:

-ON

: keep your thumb on the sensor for 4 s to turn the QS on

-OFF

:if the QS is in the ON and/or TIME mode keep your thumb on the sensor for 4 s to turn the QS

off

- touching the same sensor for 1 s, the preset temperature will change in cycles ranging from

- touching the

sensor for 3 s the heating period will be activated in fixed duration of 2 hours at the

preselected temperature

4.2.4.3 Heater function indicator - Illuminated line at the bottom of the thermostat housing (3)

4.2.4.4 Displaying the temperature with elliptical indicator (4)

Indication levels

blue – temperature up to 20°C

green – radiator temperature 40°C, 50 °C

red – temperature up to 55°C, 65°C.

flashing red light – radiator temperature exceeds 65 degrees, possible radiator overheating

(5°C) and

to 65° С