ABB ACS355 series Installation Instructions - Page 2

Browse online or download pdf Installation Instructions for Controller ABB ACS355 series. ABB ACS355 series 4 pages. Variable frequency drives in renewaire ventilators
Also for ABB ACS355 series: Supplement Manual (20 pages), Quick Installation And Start-Up Manual (2 pages), Supplemental Manual (16 pages), Quick Installation And Start-Up Manual (2 pages), Quick Installation And Start-Up Manual (4 pages), Installation Instructions (4 pages)

Print Page

6. Replace the original terminal cover (6a) with new terminal

cover (6b) (included in the delivery). If using MTAC-01 option

module, remove a detachable part (shown in the picture) from

terminal cover.

10. Fasten the hood to drive with two M3×12 screws.

11. Fasten the hood to wall with one M4 screw (not included).

ABB Oy Drives P.O. Box 184 FIN-00381 HELSINKI FINLAND Tel. +358 10 22 11, Fax: +358 10 22 22681, Internet: www.abb.com

7. Install the gland box cover.

8. Fasten the cover with three M4×16 screws.

12. Drive with MUL1-R4 option installed.

9. Install the hood. First position the front edge carefully, then

press the hood downwards until it snaps on.