ARC Audio X2 1100.5 Owner's Manual - Page 7
Browse online or download pdf Owner's Manual for Amplifier ARC Audio X2 1100.5. ARC Audio X2 1100.5 12 pages. Full-range class d amplifier
Print Page
Remote Level Control
The X2 1100.5 ships with a remote level control that can be
installed in near the driver's seat so the owner can adjust the
level of a subwoofer. The Level control only affects the output
of the SUB channel.
To set the gains on this amplifier, either leave the Remote
Level Control disconnected or turn it to it's maximum setting
(fully clockwise). The Remote Level Control functions as an
attenuator so as not to alter the gain structure of the amp and
cause distortion, unlike a remote bass boost control.
Accessing Controls and Mounting Provisions
The X2 1100.5 features our Level 2 X2-Series cosmetics. The amplifier shroud features an elegant new silver brushed-
aluminum extruded aluminum design. An acrylic plastic badge in the center of the amp illuminates in blue when the amp is
on, and can flash diagnostic codes as required. The badge may be rotate in 90 degree increments to suit any installation.
To access the controls on the top of the amp, remove the four screws in the badge and set them in a safe place. Remove
the badge and set it in a safe place. The amp shroud can now be removed for tuning and installation.
Amplifier shown represents X2-Series amplifier. Dimensions are not to scale.
CH1
CH3
SUB
CH2
CH4
CH1
CH2
Page 7