Arc Euro Trade SC3 Dismantling And Reassembly Manual - Page 13
Browse online or download pdf Dismantling And Reassembly Manual for Lathe Arc Euro Trade SC3. Arc Euro Trade SC3 17 pages.
Print Page119. The mesh and neutral position can be improved
by adjusting the position of the belt cover.
122. Fit the transfer gear assembly.
125. Check for correct gear alignment.
127. Fit leadscrew gear D.
130. Very lightly grease gears.
120. Oil the transfer gear shaft.
123. Oil the lower quadrant gear shaft.
126. "Tweak" the lower quadrant bracket until the gears are in proper alignment.
128. Adjust backlash between gears C and D.
124. Temporarily fit the gear quadrant.
129. Engage quadrant and adjust backlash between gears A and B.
131. Run spindle to check for noisy gear meshing and
readjust backlash if necessary.
132. Engage 1/2 nut and power the saddle back and
forth along the bed.
- 13 -
121. Grease the transfer gear shaft.
DO NOT engage the gears.