Cintroclear UF 500 Installation Instructions Manual - Page 3

Browse online or download pdf Installation Instructions Manual for Water Filtration Systems Cintroclear UF 500. Cintroclear UF 500 10 pages.

Print Page

Installation of Cintroclear UF 500 water purifier

IMPORTANT: to guarantee your safety when using the unit, the electrical power supply to

the purifier must be fitted with a differential trip set to 30 mA. The connection to earth

(ground) must be in order; if there is any doubt about this, consult an electrician.

Before installing the unit, check that it has no apparent damage. Never put a damaged

unit into service. Any repairs that may be required to the unit must only be performed by

qualified personnel.

Contents of installation kit supplied with our Cintroclear UF 500 purifier

1 special tap for pure water

3 m of water inlet pipe 3/8" (9 mm) red polyethylene

2 m of pure water outlet pipe 1/4" (6 mm) blue

polyethylene

1 standard 230 V power supply cable

The installation kit for your CINTROCLEAR purifier contains three accessories to provide

alternate ways in which to connect the purifier to the water supply.

RAC - 01: this automatic connector with a standard 3/4" thread can be screwed

directly on to an unused washing machine or dishwasher tap or any other tap with

a standard threaded outlet such as a laundry room tap, etc. The purifier can be

connected directly to the automatic outlet.

DIR - 01: this self-tapping valve can connect directly to a copper water supply pipe

of 10, 12, 14 or 16 mm diameter without any special tools other than a simple

screwdriver. It is then fitted with the RAC - 01 automatic connector for direct

connection of the purifier.

SEP - 01: this "Y" splitter connector allows the purifier to be connected in parallel to

a tap with a threaded outlet that is already being used by other equipment. It can

be placed in parallel with a washing machine or dishwasher or any other

equipment. One of the outlets supplies the existing household equipment, while

the other is fitted with the RAC - 01 automatic connector for direct connection of the

purifier.

Electrical connection

Connecting purifier to water supply :

2 fixing screws - 4.8 x 19 mm

2 fixing screws - 4.8 x 50 mm

1 connection accessory Ref: RAC - 01

1 connection accessory Ref: DIR – 01

1 connection accessory Ref: SEP - 01

1 Installation instructions