Arc-Zone Piranha 3 Operation Manual - Page 5

Browse online or download pdf Operation Manual for Welding System Arc-Zone Piranha 3. Arc-Zone Piranha 3 11 pages. Heavy-duty tungsten grinder

Print Page

NJUMMJVQQJOOQP=

ïïïK~êÅJòçåÉKÅçã=

máê~åÜ~=fff=léÉê~íáçåë=j~åì~äW=m~ÖÉ=R=

SAFETY INFORMATION (continued)

• Make sure that the grinder is off before plugging it in.

• Do not apply extreme force to the tungsten while grinding. This may cause your

grinder to jam or cause premature grinding wheel wear.

• Never leave the grinder unattended while running.

• Turn the grinder off first and do not leave it until it comes to a complete stop.

• Know your grinder; learn its operation, applications and limitations.

PREPARING TO GRIND ELECTRODES

THE SET UP PROCEDURE:

With the power turned off, select the Included

Angle you would like to grind. Loosen the

Angle Adjusting Knob "A" on the Collet Arm ,

rotate on its axis until the Angle Pointer is

directed at the Grind Angle Scale, re-

tightening Knob .

Insert tungsten through the appropriate Collet

Hole in the Universal Collet, observing the

height at which the tungsten contacts the

wheel.

Loosen Knob "B" to adjust the Electrode

Contact Point. The electrode should be as

close to the top of the wheel as possible.

After continuous grinding, you will begin to

wear a grove in the wheel. Adjusting knob "B"

moves the contact point down to a new spot

on the wheel.

NOTE: Diamond Grinding wheels are specifically designed for grinding tungsten

electrodes only!

^o`JwlkbK`ljI=fåÅ.

==OMVN=i~ë=m~äã~ë=aêáîÉ=píÉK=`

==`~êäëÄ~ÇI=`^==VOMNNJNRRN=

qÉäW=TSMKVPNKNRMM

==UMMKVQQKOOQP

==c~ñW=TSMKVPNKNRMQ

==bJj~áäW=áåÑç]~êÅJòçåÉKÅçã==

ïïïK~êÅJòçåÉKÅçã=