Axor Massaud 18213001 Installation Instructions Manual - Page 3
Browse online or download pdf Installation Instructions Manual for Indoor Furnishing Axor Massaud 18213001. Axor Massaud 18213001 12 pages. Lavatory/ bidet faucet
Print PageProduct Specification
Max. flow rate
2.2 gpm
Max. incoming water pressure
Recommended water pressure
Max. hot water temperature
Recommended hot water temp.
Hole size in mounting surface
valves
1 1/4"
spout
1 3/8"
Max. thickness of mounting surface 1 3/8"
Lavatory faucet 18013001 includes 10 mm supply hoses. 10 mm - 3/8" adapters included.
Bidet faucet 18213001 requires 1/2" supply lines (not included)
*Know and follow all applicable local plumbing codes when setting the temperature on the water heater. In Massachusetts,
the water heater may be set no higher than 112
Installation
Flush the hot and cold supply lines thoroughly before
installing this faucet.
Install the metal washer and friction washer on the valve.
From below the mounting surface, push the valve up
through the hole (1).
Install the o-ring on the upper mounting plate (2).
Secure the upper mounting plate to the valve by turning it
clockwise.
Lower the valve so that the mounting plate rests on the
mounting surface (1). Tighten the screws (2).
145 psi
14.5 - 72 psi
176
F*
o
120
F - 140
F*
o
o
F.
o
3