Cipax CPX Series Installation And User Manual - Page 14

Browse online or download pdf Installation And User Manual for Water Heater Cipax CPX Series. Cipax CPX Series 17 pages. Closed tank 1350l

Print Page

Insert the provided screws

and gently tighten them

alternately until the

extension neck appears to

be tightly against the tank.

Pack material for backfilling against the tank

and at least 200 mm around it. Use sand or

gravel without any sharp stones that can

harm the tank. Be sure to fill in around the

lower edge so that the tank is well supported.

Do NOT use a vibratory plate

compactors when backfilling!

The tank is normally emptied

via the lid, but if the tank is to be

emptied via a separate emptying pipe,

a ventilation pipe must be fitted as

recommended by your local waste

removal provider. The ventilation pipe

should have a diameter 1,5x the diameter

of the emptying pipe. Without a

ventilation pipe, there is a risk

the tank will collapse inwards

upon emptying.

Backfilling

Emptying the tank