Accurate Technology Pro-60 User Manual - Page 5

Browse online or download pdf User Manual for Measuring Instruments Accurate Technology Pro-60. Accurate Technology Pro-60 12 pages. Wood moisture meter

Print Page

Each time the Species Button is pressed, it will increment the Species Table Index

value and show the current setting for that index. The index value will increment to 3

and wrap back to 1.

To exit Species Select Mode, momentarily press and then release the HOLD button.

PROGRAMMING

To select a new Species Table Index, press and release the Species Button. The

current species index and the value will be displayed. Press the Species Button again

to toggle through the 3 available species indexes.

To change the species setting value of the species index being displayed from the

species index view display, press and hold the Species Button and the Hold Button

simultaneously for at least 3 seconds, then release. The meter is now in the Edit Mode

and the colon symbol ":" will begin blinking.

In Edit Mode, the Species Button increments the Species Setting value. Press the

Species Button and release it in less than 1 second, to increment the species value by

01. If you hold down the Species Button, it will increment by 10 each 1 second. The

value will go up to 70, then will wrap around to 30 and continue incrementing.

When you have reached the desired Species Setting value, press and release the Hold

Button. This will save the Species Setting value in non-volatile memory and the meter

will go into Measurement Mode.

Your commonly used species setting index numbers can be written on the meter

overlay decal in the space provided using a pencil or non-permanent marker, and

erased with a swab dipped in isopropyl alcohol. Avoid using a permanent marker

because staining of the decal may occur.

Accurate Technology Pro-60

SPECIES

TABLE

INDEX

VALUE

Example: Species Table Index Value= 3, Species setting = 35

3:35

SPECIES SETTING

(COLON BLINKS

DURING EDIT

MODE)

Page 5 of 12