Accurate Technology ProScale 18W User Manual - Page 18

Browse online or download pdf User Manual for Scales Accurate Technology ProScale 18W. Accurate Technology ProScale 18W 20 pages.

Print Page

The Digital Readout Programming Parameters are listed below.

Values in [ ] are the range of values available for that Parameter.

Factory defaults values are shown in

Pr 1 – Datum Key

The programmed value that will be recalled whenever the Datum key is

pressed during normal operation.

Default = 0.00

Pr 2 – Direction of Travel

This parameter controls the sign of travel (positive vs. negative) when the

measuring system is moved.

Default = 0

Pr 3 – Key Lockout

This parameter controls the operation of the +,

(set to 1), these keys will not function and the

display. This prevents accidental changes when depressing these keys

during normal operation.

Default = 0

Pr 4 – Display Resolution

This parameter sets the number of places to the right of the decimal point on

the display. When the DRO is in a decimal mode (in, mm or cm), it will auto-

range to the next resolution if the value is too large to be displayed in the

current resolution but is displayable in an alternate resolution.

A value of 1 will display x.x.

A value of 2 will display x.xx

A value of 3 will display x.xxx

Default = 3

•

This programming option has no effect when displaying fractions.

Pr 5 – Movement for Auto-On function

This parameter sets the amount of encoder, or system, movement required

to automatically wake up the digital readout when it is turned off.

Default = 0.1mm

Manual Part # 800-1405-001, Rev A

Bold Red.

to + 999.999in] or

LOCK

to +9999.99mm]

or 1]

and

keys. If enabled,

DATUM

symbol will appear on the

[1, 2,

[0.3 to 10mm]

Page 18 of 20

]