CipherLab 1660 Quick Start Manual

Browse online or download pdf Quick Start Manual for Scanner CipherLab 1660. CipherLab 1660 2 pages. Cordless scanner

Print Page

1660/1661 Cordless

Scanner Quick Start Guide

Download the user manual CD contents using GoBetween, available at

http://ccs.cipherlab.com

Open Your Box

1660 Scanner —

1661 Scanner —

Barcode Scanner

CipherLab dongle

Setup Cards

Rechargeable Li-ion battery

Quick Start Guide

Direct USB Cable

Setup Cards

Quick Start Guide

LED Indicator

1661 only: Micro USB I/O Connector

Power/Delete Key

Trigger Key

Buzzer

Scan Window

Power on...

1660 Scanner

requires two AAA Alkaline batteries.

1661 Scanner

requires own rechargeable Li-ion battery.

Step 1:

Remove battery cover and insert battery or batteries.

Step 2:

Press the

Power/Delete

key for about 2 seconds.

The scanner will respond with a long beep (high) tone, and the LED light will

become solid red and go off quickly.

www.cipherlab.com

Live Mode

BT Connection —

By factory default, the scanner is set to use BT HID for connecting to PC or target device.

You may change to BT SPP if necessary. BT pairing is required for establishing a connection.

CipherLab Dongle —

You may use 3610 for a quick connection. All it takes is to scan the two barcode labels at

back of the dongle. No pairing is required. By factory default, the dongle is set to use USB

HID. You may change it to USB Virtual COM if necessary.

>> See setup card: 3a/4a

Authentication

By factory default, authentication is disabled on the scanner, meaning no PIN is required

unless a PIN code is displayed on the target device (see Random PIN).

Use Preset PIN

Preset PIN "0000" —

Scan the

Enable Authentication

barcode. By factory default, it is set to use "0000".

Preset PIN other than "0000" —

Step 1:

Scan the

Enable Authentication

barcode.

Step 2:

Scan the

Start numeric

and

End

barcodes.

Use Random PIN

While pairing, if you see a PIN code displayed on the target device, scan the

and

End

barcodes to input the same code.

>> See setup card: 2a/2b

Set Connection

Serial Number

3610

Start numeric

Memory Mode

If real-time data collection is not desired, you may set the scanner to work in Memory Mode.

Then, upload data when you are done with data collection.

Step 1:

Scan the

Enable Memory Mode

barcode.

Any Live Mode connection will be suspended.

Step 2:

Scan data.

Step 3:

Scan the

Send Data

barcode. The scanner will resume Live Mode connection.

It will transmit data via preset BT interface or CipherLab dongle.

Step 4:

Scan the

Clear Data & Confirm

barcodes when you are done with data upload.

>> See setup card: 1a

1661 Only

If you're using 1661, you may connect the USB cable for data upload, as well as for battery

charging. It takes about 4 hours to fully charge the battery.

Step 1:

Scan the

Enable Memory Mode

barcode.

Step 2:

Scan data.

Step 3:

Connect the USB cable.

Step 4:

Scan the

Send Data

barcode when you are done with data collection.

Step 5:

Scan the

Clear Data & Confirm

barcodes when you are done with data upload.

Direct USB connection

for 1661 only

>> See setup card: 1a

>>>