Arcam A15 Owner's Manual - Page 8

Browse online or download pdf Owner's Manual for Amplifier Arcam A15. Arcam A15 13 pages.

Print Page

Bluetooth Operation

Connecting your phone or tablet:

To pair your Bluetooth source device, open the Bluetooth settings on your source device and scan for
A5/A15/A25 ###### from the list. Each product has a unique ID.
By default, the amplifier does not need to be on the BT input for Bluetooth pairing of a source device.
The Amplifier can recall 5 device pairings. If 5 are in memory already, the oldest will be replaced.
Because portable devices often have a volume slider, there is a maximum volume setting in the amplifier to
prevent excessive volume output being selected accidentally. The default is 40.

Connecting your wireless headphones:

To pair Bluetooth headphones, press
When you see SPEAKERS, press the down cursor button on the remote control to see options. Paired
Headphones will be listed, or select Pair BT Output (A5/A15) or Pair New Bluetooth Device (A25). Your
headphone must be in pairing mode to be discovered and paired.
Bluetooth headphones cannot be used with the Bluetooth input.

Audio Menu

Press the MENU button on the amplifier or the
Use the the navigation buttons on the remote control.
Select between Speakers and Bluetooth headphones. Bluetooth headphones need to be on
and paired to appear in the list.
Audio Output
Default is Speakers.
To pair new Bluetooth headphones, put them in pairing mode, and then press the DOWN
cursor and select PAIR BT OUTPUT (A5 & A15) or PAIR NEW BT DEVICE (A25).
Adjust the volume balance for left or right gain using the UP and DOWN curcor buttons and
Balance
select to set.
Default is 0 (centre).
Select a different DAC filter.
DAC Filter
Default is 0 (A5 & A15) or LIN PHASE FAST (A25).
Select between STD (Standard) and WDE (Wide) PLL settings. Wide setting is more tollerant
(Input) PLL
of variable quality digital audio sources such as satellite receivers.
(A5 & A15 only)
Default is STD.
8
ARCAM A5_A15_A25 OM EN
on the remote control and select Audio Output.
on the remote control.