AXT ELECTRONIC VSE Insruction Manual - Page 9

Browse online or download pdf Insruction Manual for Farm Equipment AXT ELECTRONIC VSE. AXT ELECTRONIC VSE 10 pages. Electronic doorkeeper

AXT ELECTRONIC VSE Insruction Manual
b) Change language from English to French
1.
-
activate the Menu (= hold Magnet for 3sec. at "OK/Menu")
2.
-
Use „down" 3times to go to the menu-item „Language"
3.
-
Go into the menu-item with "OK"
4.
-
With „down" 1time change the language from „2. English" to „3. Francais"
5.
-
The language is saved and can be used immediately in the whole menu.
Press down/up to select a new menu item for setting, or select and confirm the last menu item "EXIT", or wait 1 minute and do not operate anything
c)
To open set "TIME ONLY" mode for all days.
1.
-
activate the Menü (= hold Magnet for 3sec. at "OK/Menu")
2.
-
With „down" 1time choose menu-item „Opening Mode"
3.
-
Go into the menu-item with „OK".
4.
-
With „down" 2times chose the Mode „TIME ONLY" and confirm with ok.
5.
-
It is displayed the Opening time for Monday to Sunday (Mo-Su).
-
If you want to leave everything as it is, use „OK" 3times in a row.
The cursor goes one step further each and confirms the set values.
-
Finally, the setting is saved and the system returns to the Opening Mode menu-item.
6.
Press down/up to select a new menu item for setting, or select and confirm the last menu item "EXIT", or wait 1 minute and do not operate
d) For closing, set "LUX ONLY" mode, close only at dusk, no Time
1.
-
activate the Menu (= hold Magnet for 3sec. at "OK/Menu")
2.
-
Mark the menu item "Closing Mode" with 2x "down".
-
Press Ok to enter the menu item.
4.
-
With 1x "down" select the mode "ONLY LUX" and confirm with Ok.
5.
-
The light threshold for closing is now requested. This is the sensitivity for detecting darkness.
If you do not want to change anything, confirm the value with "OK".
The default is 3 lux.
6.
-
The light delay for closing is now requested. This is a time value in minutes.
The doorkeeper would close this value as a delay after detecting darkness.
If you do not want to change anything, confirm and save the value with OK.
The default value is 00 min, i.e. „no delay"
7.
-
As " LUX ONLY " excludes a time control, nothing else needs to be set, so you immediately return to the menu
item "Closing Mode".
-
The setting was successfully completed.
8.
Press down/up to select a new menu item for setting, or select and confirm the last menu item "EXIT", or wait 1 minute and do not operate anything
AXT-electronic GmbH & Co.KG * Wartburgstraße 10 * 99817 Eisenach *
to have the menu guidance end automatically.
anything to have the menu guidance end automatically.
to have the menu guidance end automatically.
2
* www.axt-electronic.de