AXTON PERFECT V-FIT AC26E46 Installation Manual - Page 8

Browse online or download pdf Installation Manual for Speaker System AXTON PERFECT V-FIT AC26E46. AXTON PERFECT V-FIT AC26E46 13 pages. 2-way component system

Print Page

CROSSOVER MOUNTING

The in-line crossover comes with an adhesive tape on the backside. Adhere the cross-

over to the lower rear area of the door panel. There is enough place left for the crossover.

Now connect the woofer cable to the AXTON woofer.

Run the tweeter wire to upper front area of the door panel; to the place of the tweeter

foam shell. Be careful that the cable doesn't cross the area of the airbag's opening!

There is a switch on the crossover PCB to decrease the tweeter volume level by -3dB.

Cable to mid/woofer

with fast-on connector

TWEETER INSTALLATION

The tweeter is located behind a cover which surrounds large parts of the door and the

door's window frame.

Remove the two plastic rivets in area of the door's hinge. Then you can carefully pull off the

cover from the frame.

The original tweeter is fixed in place by two torx 30 screws. Unscrew only these two

screws to avoid that the mirror falls down. Re-insert and tighten up the two torx 30 screws

after you have removed the tweeter.

The foam shell, which holds the original tweeter, becomes the new housing for the

AXTON tweeter. You can now mount this foam shell together with the tweeter on the panel.

The wire should be pointing to the bottom of the cover.

Now mount the cover including the tweeter back in place. Make sure that the cover fits

perfectly.

AC26E46 V-Fit Manual.indd 8

Input terminal

Switch for tweeter

level -3dB/0dB

– 8 –

Cable to tweeter

with fast-on connector

12.02.2008 17:09:20 Uhr