Arcam SOLO MOVIE 2.1 Custom Installation Notes - Page 8

Browse online or download pdf Custom Installation Notes for Receiver Arcam SOLO MOVIE 2.1. Arcam SOLO MOVIE 2.1 17 pages.

Arcam SOLO MOVIE 2.1 Custom Installation Notes

Radio station

Request radio station label (DAB/RDS)
Example
Command/response sequence to request station label, where the new station is called "DAB
STATION 2":
0x21 0x01 0xDE 0x01 0xF0 0x0D
Command:
0x21 0x01 0xDE 0x01 0x0D 0x44 0x41 0x42 0x20 0x53 0x54 0x41
Response:
0x54 0x49 0x4F 0x4E 0x20 0x32 0x0D

Radio station information

Request information on the current radio station.
Example
Command/response sequence to request the station frequency, where the source is AM and the
frequency is 1089kHz:
0x21 0x01 0xDF 0x02 0xF0 0x00 0x0D
Command:
0x21 0x01 0xDF 0x01 0x02 0x04 0x41 0x0D
Response:
Example
Command/response sequence to request the station frequency, where the source is FM and the
frequency is 105.2MHz:
0x21 0x01 0xDF 0x02 0xF0 0x00 0x0D
Command:
0x21 0x01 0xDF 0x01 0x02 0x69 0x32 0x0D
Response:
Example
Command/response sequence to request the signal strength, where the current signal strength
is 10:
0x21 0x01 0xDF 0x02 0xF0 0x01 0x0D
Command:
0x21 0x01 0xDF 0x01 0x02 0x0A 0x00 0x0D
Response:
RS232
Arcam (A&R Cambridge Ltd), Pembroke Avenue, Waterbeach, CAMBRIDGE, CB25 9QR, England
(solo movie)
8
+44 (0)1223 203200 www.arcam.co.uk/extranet
Byte:
Description:
ZN
0x01 (Zone)
CC
0xDE (Command code)
NB
0x01 (Number of bytes)
DATA
0xF0 = Request the current DAB station
RESPONSE
Byte:
Description:
ZN
0x01 (Zone)
RC
0xDE (Reply Code)
AC
0x01 (Answer code)
NB
(Number of bytes)
Dn
Response:
The service label of the new radio
station, in ASCII characters
Byte:
Description:
ZN
0x01 (Zone)
CC
0xDF (Command code)
NB
0x02 (Number of bytes)
D1
0xF0 = Request station information
D2
If the current source is FM/AM:
0x00 = Request the station frequency
0x01 = Request the station signal
strength
If the current source is DAB:
0x01 = Request the station signal
strength
0x02 = Request the station MPEG mode
0x04 = Request the station data rate
RESPONSE
Byte:
Description:
RC
0xDF (Reply Code)
AC
0xDF (Answer code)
NB
0x03 (Number of bytes)
D1
0x00 = Message contains station freq.
0x01 = Message contains signal
strength
0x02 = Message contains MPEG mode
0x04 = Message contains data rate
D2
Response to the AM frequency request:
MSB of current frequency
Response to the FM frequency request:
MHz of current frequency
Response to the DAB MPEG mode
request:
0x00 = Stereo
0x01 = Joint stereo
0x02 = Dual mono
0x03 = Mono
Response to the DAB data rate request:
0x00 - 0xC0 (0 - 192kb/s) = data rate
Response to the signal strength
request:
0x00 - 0x10 = signal strength
D3
Response to the AM frequency request:
LSB of current frequency
Response to the FM frequency request:
kHz/10 of current frequency
Response to the DAB MPEG mode
request:
0x00
Response to the DAB data rate request:
0x00
Response to the signal strength
request:
0x00