Arcan 114172 Operating Instructions Manual - Page 7

Browse online or download pdf Operating Instructions Manual for Jacks Arcan 114172. Arcan 114172 7 pages. 3 ton aluminum service jack

Print Page

TROUBLESHOOTING

Important: Service jacks are self-contained devices used for lifting, but not sustaining, a partial vehicular load. In accordance with

ASME PASE-2019 Load Sustaining Test: "A load not less than the rated capacity...shall not lower more than 1/8" (3.18mm) in the first

minute, nor a total of .1875" (4.76mm) in 10 minutes." Lowering within this range is considered normal operation and is NOT a

warrantable defect.

PROBLEM

1. Unit will not lift rated load.

2. Unit will not sustain rated load or feels "spongy" under rated

load.

3. Unit will not lift to full height.

4. Unit will not lower completely.

5. Handle tends to raise up while the unit is under rated load.

6. Unit still does not operate.

SPECIFICATIONS

Capacity

Minimum Lift Height in.

Maximum Lift Height in.

Rear Caster Size in.

Front Wheel Size in.

Saddle Diameter in.

LIMITED WARRANTY

ARCAN® PROFESSIONAL TOOLS WARRANTS TO ITS CUSTOMERS THAT THE COMPANY'S ARCAN®

PROFESSIONAL TOOLS BRANDED PRODUCTS ARE FREE FROM DEFECTS IN WORKMANSHIP AND

MATERIALS.

Arcan® Professional Tools will repair or replace its Arcan® Professional Tools branded products which fail to give

satisfactory service due to defective workmanship or materials, based upon the terms and conditions of the following

described warranty plans attributed to that specific product. This product carries a ONE-YEAR warranty. During this

warranty period, Arcan® Professional Tools will repair or replace at our option any part or unit which proves to be

defective in material or workmanship.

Other important warranty information:

This warranty does not cover damage to equipment or tools arising from alteration, abuse, misuse, damage and does

not cover any repairs or replacement made by anyone other than Arcan® Professional Tools. The foregoing obligation is

Arcan® Professional Tools' sole liability under this or any implied warranty and under no circumstances shall we be liable

for any incidental or consequential damages.

Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above

limitation or exclusion may not apply to you. If you have any questions about warranty service, please contact Arcan®

Professional Tools. This warranty gives you specific legal rights and you may also have other rights which vary from state

to state.

1-800-879-7316

Monday - Friday 8:30am to 5:30pm EST

P.O. Box 1203

Travelers Rest, South Carolina 29690

ALJ3TV

3 Tons

Handle Length in.

3.85"

Product Length in.

19.4"

Product Width in.

1.98"

Product Height in.

2.57"

Product Weight lbs.

4.57"

Shipping Weight lbs.

ACTION

Purge air from hydraulic system by following procedure under

SETUP.

Purge air from hydraulic system as above.

Check oil level. Make sure hydraulic system is not overfilled.

Pump the handle rapidly several times to push oil past ball valves in

power unit.

Contact customer service

47.4"

26.97"

12.83"

6.69"

55 lbs.

60.8 lbs

04/21/2023