Arcan XL35R Owner's Manual - Page 2

Browse online or download pdf Owner's Manual for Jacks Arcan XL35R. Arcan XL35R 10 pages. Professional low profile jack

Print Page

Operating instructiOns • Warning infOrmatiOn • parts BreakdOWn

This is the safety alert symbol. It is used to alert

you to potential personal injury hazards. Obey all

safety messages that follow this symbol to avoid

possible injury or death.

IMPORTANT: READ THESE INSTRUCTIONS BEFORE OPERATING

BEFORE USING THIS DEVICE, READ THIS MANUAL COMPLETELY AND THOROUGHLY. UNDERSTAND ITS OPERATING

PROCEDURES, SAFETY WARNINGS AND MAINTENANCE REQUIREMENTS.

It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is also the

responsibility of the device owner to keep this manual intact and in a convenient location for all to see and read. If the

manual or product labels are lost or not legible, contact Arcan for a free replacement. If the operator is not fluent in

English, the product and safety instructions shall be read to and discussed with the operator in the operator's native

language by the purchaser/owner or his designee, making sure that the operator comprehends its contents.

THE NATURE OF HAZARDOUS SITUATIONS

WARNING

The use of portable automotive lifting devices is subject to certain hazards that cannot be prevented by mechanical

means, but only by the exercise of intelligence, care, and common sense. It is therefore essential to have owners and

personnel involved in the use and operation of equipment who are careful, competent, trained, and qualified in the safe

operation of the equipment and its proper use. Examples of hazards are dropping, tipping or slipping of loads caused

primarily by improperly securing loads, overloading, off–centered loads, use on other than hard level surfaces, and using

equipment for a purpose for which it was not designed.

METHODS TO AVOID HAZARDOUS SITUATIONS

WARNING

• Read, study, understand and follow all instructions before operating this device.

• Inspect the jack before each use. Do not use jack if damaged, altered, modified, in poor condition, leaking hydraulic

fluid, or unstable due to loose or missing hardware or parts. Make corrections before using.

• Lift only on areas of the vehicle as specified by the vehicle manufacturer.

• Wear eye protection that meets ANSI Z87.1 and OSHA standards.

• Do not use jack beyond its rated capacity.

• This is a lifting device only. Immediately after lifting, support the vehicle with jack stands capable of sustaining the

load before working on the vehicle.

• Use only on a hard level surface free from obstructions so the jack is free to reposition itself during lifting and

lowering operations.

• Center load on saddle. Be sure setup is stable before working on vehicle.

• Do not move or dolly the vehicle while on the jack.

• Do not use saddle adapters or saddle extenders between the stock lifting saddle and the load.

• Do not use any adapters unless approved or supplied by Arcan.

• Always lower the jack slowly and carefully.

• Failure to heed these markings may result in serious or fatal personal injury and/or property damage.

CONSEQUENCES OF NOT AVOIDING HAZARDOUS SITUATIONS

WARNING

Failure to read this manual completely and thoroughly, understand its OPERATING INSTRUCTIONS, SAFETY

WARNINGS, MAINTENANCE INSTRUCTIONS and not comply with them, and neglecting the METHODS TO AVOID

HAZARDOUS SITUATIONS could cause accidents resulting in serious or fatal personal injury and/or property damage.

XL35R

WARNING: Indicates a hazardous

WARNING

situation which, if not avoided, could

result in death or serious injury.

rev. 07/28/08