CIRCLE FITNESS Sp8 Owner's Manual - Page 12

Browse online or download pdf Owner's Manual for Exercise Bike CIRCLE FITNESS Sp8. CIRCLE FITNESS Sp8 17 pages.

Print Page

Maintenance Chart

DESCRIPTION

Keep machine clean: Wipe machine

down with clean & dry fabric to clear

dirt & sweat.

Wipe Anti-rusty cream or similar on

the seat post set, handlebar set

Visual check

Check security of handle bar post &

seat post

Check security of saddle

Remove handlebar post and clean

head tube

Remove seat post and clean seat

tube

Check if any noise

Check tension knob system

Check security of all knobs & release

lever

Check toe straps for signs of wear

Check crank bolts and re-tighten

Make sure pedals are screwed in

Check the magnetic holder in correct

position

Check belt tension

Wipe the anti-rust oil on the middle

range of flywheel surface (avoid

the stickers)

Check bottom bracket

Check flywheel bearings

Full service-frame inspection

※ Adjusting the belt tension:

1) Loosen the bolt (47), and take off the belt guard (19, 31).

2) Loosen the nut (36).

3) Turn the nut of the adjuster bolt (16) to adjusting the belt tension. Suggest turn 1/4 circles each time.

Don't turn too much to causing tension too tight then damage the axle and bearings.

Please make sure this step be performed on both left & right sides and the adjustment distance is the

same. After adjusted, Make sure flywheel keeps parallel with frame and in the middle position.

4) After finished the above steps, screw the nut (36) by both sides. Make sure the nut is tighten and fixedly.

Daily

Weekly Monthly Quarterly Annually