CIRCLE FITNESS E8 Service Manual - Page 11
Browse online or download pdf Service Manual for Elliptical Trainer CIRCLE FITNESS E8. CIRCLE FITNESS E8 16 pages.
Print Page
4. Engineering Mode
4.1 ENGINEERING MODE 1: Settings
While in idle mode, press and hold the CLEAR/RESET button then press the LEVEL UP button for 3
seconds to enter the setting mode.
Software Version:
Message window shows【VER】, time
window shows software version, press
ENTER to next setting.
Language Selection: Message window shows 【SET LANGUAGE】one time then shows
『ENGLISH』 . Press▲ or ▼ button change to 『NEDERLANDS』 or 『 FRANCAIS』 or 『 DEUTSCH』
or 『ITALIANO』or『ESPANOL』or『POLAND』, press ENTER button to next setting.
(This function is only for software version 1.03 or above.)
Unit Setting:
Message window shows【SET UNIT】one time then shows【METRIC】, press▲ or ▼ button
change to【ENGLISH】(Imperial), press ENTER button to next setting.
Total Used Distance: Message window shows【ODO】, DISTANCE & TIME window shows
the total used distance.
Total used distance= TIME window value + (DISTANCE window value X 10000)
Press and hold RESET/CLEAR button and press ENTER button for 5 seconds to reset the
total used distance value, press ENTER button to next setting.
Total Used Hours: Message window shows【HRS】, TIME windows shows total hours value.
Press and hold RESET/CLEAR button for 5 seconds to reset the total used hours.
USB port is NOT
configured.
Press ENTER back to idle mode.
Document:
Service Manual
Description:
Elliptical/Upright Bike/ Recumbent Bike
Model:
E7/B8/R8
Machine Type Selection:
Message window shows【SET TYPE】, time
window show software version, press ENTER
to next setting.
11
Display Type:
LED
SET Year, Month, Day, Hour, and
Minute.
Press ENTER back to idle mode.
Page:
11
of 16
Release Date:
2017/08/31
USB port is
configured.