digico SD7 Technical Notes - Page 4

Browse online or download pdf Technical Notes for DJ Equipment digico SD7. digico SD7 11 pages. Replacing and cleaning faders
Also for digico SD7: Manual (9 pages)

digico SD7 Technical Notes
TN198 Page 4 of 11
Then unscrew all the screws on the Engine Fan Plate and remove. Ensure the Fan Power Cable
comes away with the Fan Panel without getting caught on other cables.
Release the Engine board tray by unscrewing the following 4 screws :
2 Screws on the front of the Engine, each side of the rows of BNC connectors.
2 Thumb-screws inside the rear of the Engine.
Once the four retaining screws have been released (two on the front, two at the rear), the Engine
Board will slide out from the rear of the Engine chassis. You may need to lift the Engine Board tray
slightly.
TN198.doc\