Axxess ASWCSTALK Installation Instructions Manual - Page 9

Browse online or download pdf Installation Instructions Manual for Automobile Accessories Axxess ASWCSTALK. Axxess ASWCSTALK 16 pages. Metra electronics automobile parts user manual

Print Page

NOTES:

•

The interface must have detected the ASWCSTALK and radio it is

attached to before you can remap any buttons.

•

You can only start the remapping of the steering wheel controls

process within the first 20 seconds of turning the ignition key on. If you

wait longer then the 20 seconds you will have to turn the ignition off

then back on again.

•

Within the first 20 seconds if any button other then Volume Up or

Volume Down is pushed, the remapping process will stop.

•

If during the remapping process no button is pushed for 30 seconds

the remapping process is aborted and the original settings are reset.

So let's begin the remapping process:

1. Ideally having the interface visible is recommended since you can see

the led flashes to confirm button recognition.

2. Turning off the radio is recommended

3. Within the first 20 seconds of turning the ignition on, press and hold

down the Volume Up button for at least 25 seconds.

4. The led will light up solid red. Release Volume Up and the led will go

out. Volume Up has now been programmed.

5. Follow the list below in order however pushing the steering wheel

control button you want for the function below. If you want to skip a

command press the Volume Up on the steering wheel, this will tell the

interface to skip the command and go to the next one.

1. Volume Up

2. Volume Down

3. Seek Up/Next

4. Seek Down/Prev