ABB Jokab Safety Safeball JSTD1 Original Instructions Manual - Page 5
Browse online or download pdf Original Instructions Manual for Controller ABB Jokab Safety Safeball JSTD1. ABB Jokab Safety Safeball JSTD1 16 pages. One/two hand enabling device
Also for ABB Jokab Safety Safeball JSTD1: Original Instructions Manual (15 pages)
Print Page
2
Overview
General description
Safeball is a one hand device which can also be used in pair to create a two hand device. They can be mounted on
a table or on aluminium profiles available from ABB/Jokab Safety. In order to increase the grip and ergonomics, the
Safeballs can be mounted on a flexible support or similar device.
Safety regulations
Warning!
Carefully read through this entire manual before using the device.
The devices shall be installed by a trained electrician following the Safety regulations, standards and the Machine
directive.
Failure to comply with instructions, operation that is not in accordance with the use prescribed in these instructions,
improper installation or handling of the device can affect the safety of people and the plant.
For installation and prescribed use of the product, the special notes in the instructions must be carefully observed
and the technical standards relevant to the application must be considered.
In case of failure to comply with the instructions or standards, especially when tampering with and/or modifying the
product, any liability is excluded.
2TLC172180M0201, rev. A
5
www.jokabsafety.com
2011-10-20