Epson 11880 - Stylus Pro Color Inkjet Printer Unpacking And Setup Manual - Page 5

Browse online or download pdf Unpacking And Setup Manual for Printer Epson 11880 - Stylus Pro Color Inkjet Printer. Epson 11880 - Stylus Pro Color Inkjet Printer 28 pages. Stylus pro11880
Also for Epson 11880 - Stylus Pro Color Inkjet Printer: Quick Reference Manual (14 pages), Brochure (1 pages), Brochure & Specs (8 pages), Network Manual (46 pages), Product Information Manual (10 pages), Limited Warranty (12 pages), Brochure & Specs (7 pages), Brochure & Specs (8 pages)

Print Page

Unpacking and Assembling the

Base Unit

Checking the contents

1. Open the box, and then lift up the box that

contains the base unit and away from the

printer.

2. Open the box that contains the base unit, and

make sure that all the items shown below are

included and not damaged.

Base upright, left / Base upright, right

Horizontal strut

Hex wrench

Wing nuts, spring washers, and washers (4)

Hex socket head bolts (4)

Assembling the base unit

Warning:

Have two people working on either side to

assemble the base unit (23.2 kg).

1. Hold base upright left and a horizontal strut

as shown. Then fix the strut to the base using

the two hex socket head bolts with the hex

wrench.

Note:

Do not fasten the screws too tight. Leave room to

adjust the position when you fasten the screws on

the other base upright.

2. Referring to step 1, secure the other side of the

strut to the base.

3. Fasten four screws on the both sides of the

base upright securely.

This completes assembly of the base unit. Then,

see the next section for unpacking the printer.