Accurex DSX-3 User Manual - Page 6
Browse online or download pdf User Manual for Scales Accurex DSX-3. Accurex DSX-3 10 pages.
Print Page
8.
Operational Approach
1. [Weighing Mode]：
Under weighing mode, press 【 MODE 】 key to enter counting mode.
UNIT SELECT： Press 【UNIT】 key to select the weighing unit of KG or LB, the corresponding indicator
will appear on the display screen.
TARE：Place the items on the scale plate which need to removed the tare weight, then press
【TARE】 key, the 'WEIGHT' window displays '0' and the 'TARE' indicator light is on; At this point,
remove the item has been tared from the scale plate, the 'WEIGHT' window displays a negative
number, press【TARE】key again, the 'WEIGHT' window displays '0',and the 'TARE' indicator light
is off.
ZERO：In the process of using, if there is a zero shift phenomenon appears, that is, there is nothing
on the scale, but there will be a weight display in the 'WEIGHT' window. The weight could displays
'0' by pressing 【ZERO】key.(Zeroing range: ≤ 4%FS, For example, a 300 kg scale can only be tared
≤12 kg weight).This function is not available in the TARE mode.
2. [Counting Mode]:
Under counting mode, press 【 MODE 】 key to enter percentage mode.
In counting mode, press 【 SETUP 】 key to start weight sampling, the 'WEIGHT' window displays
'SAPX', X is the number of samples. Press 【 ↑ 】 key, screen will display '10,20,50,100,200,500,1000'
seven sampling number in turn. Press【TARE】key, confirm the sampling number.
After selecting the number of samples, the 'WEIGHT' window displays 'LOAD-C', put the same
number of samples on the scale plate, and press【TARE】key to complete the sampling.
Under sampling mode, press 【 SETUP 】 key to exit sampling mode.
3. [Percentage Mode]:
Under weighing mode, press 【 MODE 】 key to enter weighing mode.
In percentage mode, the indicators of 'KG','LB','PCS' are all off.
Press 【 SETUP 】 key and the 'WEIGHT' window displays 'LOAD-P'. There are two ways to sample
the weight: