Axxess AX-ADBOX1 series Installation Instructions

Browse online or download pdf Installation Instructions for Recording Equipment Axxess AX-ADBOX1 series. Axxess AX-ADBOX1 series 4 pages. Ax-adbox series main interface control box

Print Page

AX-ADBOX1

AX-ADBOX Series main interface control box

Note: This is a general list for the AX-ADBOX1 lineup. Please see the individual

harnesses for exact features available.

• Provides accessory (12-volt 10-amp)

• Retains R.A.P. (retained accessory power)

• Used in amplified, non-amplified systems

• Retains chimes (GM)

• Turn signal click (GM)

• Provides NAV outputs (parking brake, reverse, mute, and V.S.S.)

• Pre-wired ASWC-1 harness included (ASWC-1 sold separately)

• Retains OnStar/OE Bluetooth

• Adjustable gain control for overall volume (on amplified systems)

• Adjustable gain control for chimes and OnStar (GM)

• Retains SYNC in Ford (if equipped)

• Adjustable gain control for SYNC (Ford)

• Retains Blind spot detection system in Chrysler/Dodge/Jeep (if equipped)

• High level speaker input

• Micro "B" USB updatable

• Retains balance and fade

• Retains digital fade (excluding Ford and VW vehicles)

Axxess Integrate

Installation instructions for AX-ADBOX1

axxessinterfaces.com

See application list inside

• AX-ADBOX1 interface

• 16-pin harness with stripped leads

• Cutting tool • Crimping tool • Tape • Connectors

(example: butt-connectors, bell caps, etc.)

CAUTION!

tery terminal before beginning any installation, unless the vehicle

manufacturer recommends against so. Please check with your local

Dealership for more information. All accessories, switches, climate

controls panels, and especially air bag indicator lights must be con-

nected before reconnecting the battery or cycling the ignition. Also,

do not remove the factory radio with the key in the on position, or the

vehicle running. It would be best to remove the key from the ignition

and then wait a few seconds before removing the factory radio.

•

metraonline.com

Metra recommends disconnecting the negative bat -