Axxess AXAC-FD1 Installation Instructions Manual

Browse online or download pdf Installation Instructions Manual for Recording Equipment Axxess AXAC-FD1. Axxess AXAC-FD1 8 pages. Ford camera interface with pre-wired harness 2011-up

Print Page
INTERFACE COMPONENTS
• AXAC-FD1 interface
• AXAC-FD1 interface harness
• AXAC-FD1 vehicle harness (qty. 2)
• 12-pin T-harness
• 54-pin T-harness
APPLICATIONS
Ford
Edge
2011-Up
F-150
2013-Up
F-250/350/450/550
2017-Up
AxxessInterfaces.com
Ford† Camera Interface With Pre-Wired Harness
2011-Up
†
With either a 4.2-inch, 6.5-inch, or 8-inch display screen
Visit
AxxessInterfaces.com
vehicle specific applications
INTERFACE FEATURES
• (4) Camera inputs *
• Reverse signal trigger generated via CAN bus communication of the vehicle
• Turn signal trigger generated via CAN bus communication of the vehicle
• (4) Programmable camera control wires
• Micro-B USB updatable
* Models equipped with NAV can only use front and rear camera inputs
Note: AXAC-FDSTK (sold separately) required for 2014-Up models
with a 4.2-inch display screen.
Focus
2012-2019
Fusion
2013-Up
Mustang
2015-Up
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
for more detailed information about the product and up-to-date
Transit
2014-2019
Transit Connect
2015-2018
Ranger
2019-Up
AXAC-FD1
I N S TA L L AT I O N I N S T R U C T I O N S

TABLE OF CONTENTS

Introduction............................................................2
Configuration ..................................................... 2-4
Connections ............................................................5
Installation .............................................................6
Programming .........................................................6
REQUIRED ITEMS (sold separately)
Update Cable: AXUSB-MCBL
Supplemental Harness ‡: AX-ADDCAM-FDSTK
‡ 2014-Up models with 4.2-inch display screen only
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Tape • Wire cutter • Zip ties
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
REV. 3/31/20 INSTAXAC-FD1