Axxess AXDSPL-HN1 Installation Instructions Manual - Page 4

Browse online or download pdf Installation Instructions Manual for Recording Equipment Axxess AXDSPL-HN1. Axxess AXDSPL-HN1 16 pages. Acura dsp interface with pre-wired harness 2009-2014

Axxess AXDSPL-HN1 Installation Instructions Manual
ADDING A FULL-RANGE AMP & SUB TO A FACTORY SYSTEM
RCA Jacks
(sold separately)
Factory Radio
Bass Knob
Factory Amp
If equipped, bypass
and remove
Black - Ground
Any remaining wires
Orange - Control
tape off and disregard
Assignable Outputs Labeled CH 6-10
An SPDT relay, Metra part number
E-123, is required if the amp turn-on
current of all amps exceeds 1-amp.
Factory Radio Harness
Vehicle T-Harness
White / Front Left +
Interface
White/Black / Front Left -
Cut the male
Gray / Front Right +
connector off and
Gray/Black Front Right -
connect speaker
Green / Rear Left +
Green/Black / Rear Left -
Unplug connector
wires to amp
Purple / Rear Right +
Purple/Black / Rear Right -
Interface Harness
Any remaining wires
tape off and disregard
Blue/White - Amp Turn-On Wire
4