Epson 2080 - LQ B/W Dot-matrix Printer Manual - Page 2
Browse online or download pdf Manual for Printer Epson 2080 - LQ B/W Dot-matrix Printer. Epson 2080 - LQ B/W Dot-matrix Printer 29 pages. Impact printer
Also for Epson 2080 - LQ B/W Dot-matrix Printer: Specifications (2 pages)
Print Page
EPSON LQ-2080
Optional Interface Cards
You can install an optional interface card to supplement your
printer's built-in parallel interface and provide added network
compatibility. The EPSON interface cards in the table below
are compatible with your printer. (Not all interfaces are
available in all countries.)
Model number
C82305 / C82306
C82307 / C82308
C82310 / C82311
C82312
C82313
C82314
C82315
C82345
C82357 / C82362 /
C82364
The asterisk ( ) is a substitute for the last digit, which varies by country.
Printer Specifications
Mechanical
Printing method
24-pin impact dot matrix
Printing speed
High-speed draft
400 cps at 10 cpi maximum
Draft
300 cps at 10 cpi
Letter-quality
100 cps at 10 cpi
Printing direction
Bidirectional logic seeking for text and
graphics printing. Unidirectional text
or graphics printing can be selected
using software commands.
Line spacing
1/6-inch or programmable in
1/360-inch increments
Printable columns
136 columns (at 10 cpi)
Resolution
Maximum
360
360
2 - EPSON LQ-2080
Name
Serial interface card
32KB intelligent serial interface card
32KB intelligent parallel interface card
LocalTalk interface card
32KB IEEE-488 interface card
Coax interface card
Twinax interface card
IEEE-1284 parallel interface card
Ethernet interface card
180 dpi (letter quality)
360 dpi (raster graphics)
Interfaces
Paper feed methods
Paper feed speed
Paper capacity
Note:
The thickness of the paper stack can be up to 0.59 inch (15 mm).
Note:
The thickness of the paper stack can be up to 0.20 inch (5 mm).
Buffer
2/99
One standard bidirectional, 8-bit,
parallel interface with IEEE 1284
nibble mode support and one optional
interface slot
Friction (front or top paper entry)
Push tractor (front or rear paper entry)
Pull tractor (optional—front, bottom,
or rear paper entry)
Push and pull tractor (optional)
Cut-sheet feeder (optional)
Roll paper holder (optional)
Continuous
5 inches/second
Intermittent
45 ms/line at 1/6-inch line spacing
High-capacity cut-sheet feeder
up to 150 sheets of 22 lb
(82 g/m
2
) paper
up to 25 plain or bond envelopes
up to 30 airmail envelopes
up to 30 postcards
a stack of multipart forms up to
0.59 inch (15 mm) thick
Second-bin cut-sheet feeder
up to 150 sheets of 22 lb
(82 g/m
2
) paper
64KB or 0KB (selectable in the
default-setting mode or the EPSON
Remote! utility)