Epson 220 Manual - Page 19

Browse online or download pdf Manual for Printer Epson 220. Epson 220 29 pages. Epson printer parts manual

Print Page

8. Insert the paper into the front, bottom, or rear paper slot as

described below until it emerges between the platen and the

ribbon guide. Then pull up the paper until the perforation

between the first and second page is even with the top of the

printer's ribbon.

Before you load paper

in the front slot,

remove the front paper

guide. Then load paper

printable side up.

Load paper in the

bottom slot printable

side up (forward).

Before you load paper in

the rear slot, remove the

paper guide. Then load

paper in the rear slot

printable side down.

9. Fit four holes of the paper over the tractor pins on both

sprockets. Then close the sprocket covers.

10. Slide the right sprocket to remove any slack in the paper;

then lock it in place by pushing the sprocket lock back.

11. If you use the front slot, attach the front paper guide with

the continuous paper positioned as shown below. Then

close it.

If you use the rear slot, replace the paper guide and make

sure the edge guides are together in the middle of the

paper guide.

front paper

guide

12. Turn on the printer. Remove any slack in the paper and

adjust the top-of-form position by pressing the

button or using the micro adjust feature. (To use the micro

adjust feature, see "Adjusting the Top-of-Form Position" on

page 22.) The printer will start printing at the current

position without advancing the paper.

13. Attach the printer cover and close the paper guide cover.

Note:

Always close the printer cover before printing. The printer does

not print when the cover is open.

14. You may need to check and change the printer driver

settings. When the printer receives data, it automatically

loads the paper and starts printing. As shown below, the

printed pages are fed over the paper guide toward the back

of the printer.

15. After you finish printing, open the paper guide cover; then

tear off the printed document at the perforation nearest the

paper exit slot.

tear off here

edge guides

2/99

Caution:

Never use the knob to remove slack in the paper or to

adjust the top-of-form position while the printer is turned

on; this may damage the printer or cause it to lose the

top-of-form position. The knob can be used only when

the printer is turned off.

Always remove any slack from the paper; otherwise

print quality may be reduced.

EPSON LQ-2080

LF/FF

EPSON LQ-2080

- 19