Epson 4000 - Stylus Pro Color Inkjet Printer Quick Reference Manual - Page 2

Browse online or download pdf Quick Reference Manual for Printer Epson 4000 - Stylus Pro Color Inkjet Printer. Epson 4000 - Stylus Pro Color Inkjet Printer 11 pages. Print engine
Also for Epson 4000 - Stylus Pro Color Inkjet Printer: Brochure & Specs (4 pages), Product Reference Manual (38 pages), Product Information (13 pages), Start Here Manual (6 pages), Product Support Bulletin (17 pages), Important Information (2 pages), Limited Warranty (12 pages), Brochure & Specs (12 pages), Brochure & Specs (6 pages), Setup Manual (16 pages)

Epson 4000 - Stylus Pro Color Inkjet Printer Quick Reference Manual

Loading Paper in the Tray

Loading Paper in the Tray
Make sure the printer is on and roll paper is not loaded
for printing.
Caution:
Heavy media or very glossy media (such
as EPSON Premium Glossy Photo Paper) cannot be
used with the paper tray.
1
Pull out the paper tray and cover.
2
Lift up the paper tray cover.
3
Flip up the paper guide roller and slide the edge
guide all the way to the left.
4
Thumb through a stack of paper, then gently tap
it on a flat surface to even the pages.
5
Load the sheets in the portrait orientation, short
edge first, with the printable side face down.
Place the paper all the way back, against the right
side of the tray.
Don't load paper above the arrow mark inside the
edge guide.
Caution:
When you add more paper, always line up
the edges with the paper already in the tray.
6
Adjust the paper tray and edge guide according
to the paper size. For small sheets, raise the
paper guide and move it to the edge of the stack.
7
Flip down the paper guide roller, then replace
the paper tray cover and adjust its length.
Note:
Make sure the roll paper support is
not raised.
8
Press the
Paper Source button until you see
the
cut sheet icon.
2