Axxess AX-AM-AU92 Installation Instructions Manual - Page 5

Browse online or download pdf Installation Instructions Manual for Automobile Parts Axxess AX-AM-AU92. Axxess AX-AM-AU92 8 pages. Hdmi and camera interface

Button Configuration
• There are (3) different sets of factory buttons used to operate the AX-AM-AU92 depending
on the trim level of the vehicle.
HDMI access
• Select AUX-IN as a source from the factory radio.
• Press and hold button "A" for 2 seconds to switch between the factory screen and the
AX-AM-AU92 screen.
• Press and hold button "A" to disable the video-in-motion warning message.
Front camera access
• Ensure dip switch 2 is selected to "ON".
• Press and hold button "B" for 2 seconds to activate the front camera.
Type 1

USER GUIDE

Type 2
Rear camera access
• The backup camera will automatically activate while the vehicle is in reverse gear.
• Deselecting the reverse gear will activate the front camera, if installed and dip switch 2 is
selected to "ON".
Note: This camera takes priority over HDMI mode, and front camera mode. But will not deactivate
the front camera. The front camera image will disappear after the vehicle reaches 10 mph.
View Version Number
• Press and hold button "A" for 8 seconds to enter the firmware information screen.
Without Steering
Wheel Controls
REV. 6/30/2018 INSTAX-AM-AU92
5