Epson 5700i - EPL B/W Laser Printer User Manual - Page 7
Browse online or download pdf User Manual for Printer Epson 5700i - EPL B/W Laser Printer. Epson 5700i - EPL B/W Laser Printer 13 pages. Product information guide
Also for Epson 5700i - EPL B/W Laser Printer: Setup Manual (33 pages), Specifications (2 pages)
Print Page
6. Remove the protective tape seal from the cover of the
developer cartridge.
Caution:
Never touch the developing roller under
the flap. Otherwise, the print quality may
be impaired.
7. Hold the cartridge by its handle and lower it into the
printer, making sure that the pins on each side of the
cartridge fit into the grooves inside the printer. Slide the
cartridge gently into the opening until it locks into place.
8. Gently press down on the printer cover until it clicks shut.
9. After turning on the printer, access the printer settings
dialog box in the printer driver, and click the
button. The Toner level clear dialog box is displayed.
Clear
10. Click
to reset the toner level counter.
OK
Whenever you replace the developer cartridge, you should
clean the paper roller as described in "Cleaning the Inside of
the Printer" on page 11.
Replacing the Photoconductor Unit
1. Make sure the printer is turned off.
2. Open the printer cover by pressing the latch on the left side
of the printer and lifting the cover up all the way.
Caution:
You must completely open the printer cover to replace the
photoconductor unit; otherwise, you may damage the printer.
3. Remove the developer cartridge (see the previous section for
instructions).
Caution:
Do not turn the developer cartridge upside down or tilt it from side to
side.
Warning:
Opening the printer cover exposes the fuser, which is marked
"CAUTION Hot Surface Avoid Contact." Be careful not to touch the
fuser. If the printer has been in use, the fuser may be very hot.
9/99
EPSON EPL-5700i
Toner Level
EPSON EPL-5700i
- 7