Epson 7800 - Stylus Pro Color Inkjet Printer Unpacking And Setup Manual - Page 10

Browse online or download pdf Unpacking And Setup Manual for Printer Epson 7800 - Stylus Pro Color Inkjet Printer. Epson 7800 - Stylus Pro Color Inkjet Printer 27 pages. Stylus pro 800 series
Also for Epson 7800 - Stylus Pro Color Inkjet Printer: Brochure & Specs (8 pages), Specifications (4 pages), Getting Started Manual (10 pages), User Manual (11 pages), Quick Reference Manual (12 pages), Supplementary Manual (1 pages), Limited Warranty (12 pages), Brochure & Specs (8 pages), Product Support Bulletin (10 pages), Brochure & Specs (16 pages), Notice Sheet (4 pages)

Print Page

2. Turning the stitch side downward, spread the

paper basket on the floor.

3. Holding the rear shaft, pass it under the

horizontal struts.

4. Rotate the rear paper basket joints to enfold

the bar that is not attached to the fabric. Insert

the stanchion pins into the holes on the base

upright left and right, as shown.

5. Slide out the upper basket hooks to their full

length.

6. Hook both ends of the center shaft (O) on the

upper basket hooks.

7. Insert the lower shafts into the holes on the

bottom of the base unit as shown below.

8. Stand the lower shafts.

9. As shown in the figure, hook the paper feed

support film on the shaft of the paper basket

(the movable hook (a) on the intermediate

shaft and the stability hook (b) on the back

shaft), so that it hangs along the inner surface

of the basket.