Epson 875DCS - Stylus Photo Color Inkjet Printer Manual - Page 4
Browse online or download pdf Manual for Printer Epson 875DCS - Stylus Photo Color Inkjet Printer. Epson 875DCS - Stylus Photo Color Inkjet Printer 13 pages. Epson stylus photo 875dcs
Also for Epson 875DCS - Stylus Photo Color Inkjet Printer: Specifications (2 pages), Supplementary Manual (2 pages)
Print Page
EPSON Stylus Photo 875DCS
Environmental
Temperature
Operation
50 to 95 °F (10 to 35 °C)
Storage*
4 to 140 °F ( 20 to 60 °C)
1 month at 140 °F (60 °C)
Transit*
–4 to 140 °F (–20 to 60 °C)
120 hours at 140 °F (60 °C)
Humidity (without condensation)
Operation
20 to 80% relative humidity
Storage*
5 to 80% relative humidity
*Stored in shipping container
Safety Approvals
Safety standards
UL 1950, CSA C22.2 No. 950
EMC
FCC part 15 subpart B class B
Control Panel
paper out
light
color ink
out light
black ink
out light
cleaning
button
Follow these guidelines when you check the control panel
lights.
P is on
The Ppower light is on when the printer is ready
to print. It flashes when the printer is receiving a
print job, charging ink, or cleaning the print head.
S flashes
When the S paper out light flashes and both ink
and
out lights come on, you have a paper jam. Press
B and A
the E load/eject button to try to clear the jam. If
are on
that doesn't work, turn off the printer and gently
pull pull the paper forward (toward the output tray)
to pull it out. Don't pull the paper backward
(toward the paper support). If you can't pull it out
through the output tray, contact your dealer or
EPSON. Make sure none of the sheets are curled,
creased, old, stuck together, or too thin. Then
reload the paper against the right edge guide and
slide the left edge guide against it. Turn on the
printer and press the E load/eject button to resume
printing.
5 - EPSON Stylus Photo 875DCS
power
light
power
load/eject
button
button
S is on
When the S paper out light comes on, your paper
is out or incorrectly loaded. Make sure none of the
sheets are curled, creased, old, stuck together, or
too thin. Then reload the paper against the right
edge guide and slide the left edge guide against it.
Press the E load/eject button to resume printing.
B or A flash
When an ink out light flashes, your ink supply is
low. Make sure you have a replacement cartridge.
B or A are on
When an ink out light comes on, you need to
replace the ink cartridge. Make sure you have a
replacement cartridge. See page 9 for instructions.
If an ink out light comes on after you've replaced a
cartridge, you installed a cartridge your printer
can't use. Remove it and replace it with the
correct type (see page 4 for ink cartridge
specifications).
P and S
When the P power and S paper out lights flash
flash and
and one or both of the ink out lights come on,
B and A
jammed paper may be blocking movement of the
are on
print head. Turn off the printer, open the cover,
and check inside for any jammed paper. Then turn
the printer back on. If the lights still flash and/or
come on, contact your dealer or EPSON.
P S B A
When all the lights flash, your printer may have an
flash
internal error. Make sure you removed all the
packing material as described on the unpacking
sheet in your printer box. Then turn off the printer,
wait a few seconds, and turn it on again. If the
lights still flash, contact your dealer or EPSON.
P S B A
When all the lights are off, the printer is not
are off
receiving power. Try these solutions:
Make sure the printer is turned on.
Turn off the printer, plug in the power cord
securely, and turn on the printer again.
Make sure the outlet is operable and is not
controlled by a switch or timer. If in doubt, try
using another outlet.
Installing an Ink Cartridge for the First
Time
Follow these ink cartridge precautions and the others in
the Printer Basics book:
Install both ink cartridges, and leave them installed for
all types of printing, or the printer won't work.
Remove the yellow tape seal from the top of the ink
cartridges or you'll permanently damage them. Don't
remove the clear seals on the bottom or ink will leak
out.
Don't touch the green chip on the back of the
cartridge. This may inhibit normal operation and
printing.
Never turn off the printer when the
flashing, unless the printer hasn't moved or made any
noise for more than five minutes.
9/00
P
power light is