DigiDesign VENUE AO16 Manual - Page 7

Browse online or download pdf Manual for Sound Card DigiDesign VENUE AO16. DigiDesign VENUE AO16 12 pages. Analog output card for venue mix rack and venue sc48

Print Page

Chapter 2: Installing the AO16 Card

This chapter provides information on installing an AO16 card

in a Mix Rack or an SC48 console.

For instructions on installing a card in a Mix Rack, see "Install-

ing an AO16 Card in Mix Rack" on page 3.

For instructions on installing a card in an SC48 console, see

"Installing an AO16 Card in SC48" on page 5.

Installing an AO16 Card in Mix Rack

Mix Rack has two available output card slots, slots D and E.

AO16 Cards can be installed in either or both slots. These in-

structions assume you already have an AO16 Card installed in

slot D and that slot E is empty.

If you are replacing an AO16 Card, you must first remove

one of the cards. See the Venue Service Guide for more

information on removing and replacing cards.

To install an AO16 Card:

Shut down the VENUE system, and turn off power to the

Mix Rack.

Disconnect all cables from Mix Rack.

Remove Mix Rack's front panel cover by unscrewing its

mounting screws (#1 Phillips).

Mounting screws (remove all)

Mix Rack front panel

Chapter 2: Installing the AO16 Card 3