Epson ActionNote 880 Product Information Manual - Page 10

Browse online or download pdf Product Information Manual for Printer Epson ActionNote 880. Epson ActionNote 880 11 pages. Product information guide
Also for Epson ActionNote 880: Cartridges Replacement (2 pages)

Print Page

Epson ActionNote 880 Product Information Manual

EPSON ActionNote 800 Series

System I/O Address Map

Installation/Support Tips

Using Low Battery Save to HDD and Instant On

the factory so that these options can be used. A 25MB area

is set aside for the saved data; this ensures that there is

enough space for all memory configurations.

located in the C:\ PM directory. Type the following

command at the DOS prompt and press

PHDISK/CREATE

AN800-10

Enter:

12/9/94

Low Battery Save to HDD or Instant On options, you need

to leave sufficient space on the disk unpartitioned. The

amount of space should equal the system memory plus

2MB. After you run FDISK to partition the drive, you need

to run the PHDISK utility to configure the storage space

on the drive.

Battery Save to HDD or Instant On options, the PCMCIA

services are not reinitialized. The computer recognizes

SRAM PC cards, but does not recognize most other PC

cards. You must reboot to reinitialize the services.

Using an External Monitor

When you connect an external monitor, make sure you turn it

on before you turn on the computer. The ActionNote

automatically detects the external monitor and displays data

on its screen. Press Fn F10 to switch your display from the

monitor to the LCD screen or to display on both screens

simultaneously.

Using a Serial Mouse

If you connect a serial mouse, you must use the Setup

program to disable the built-in trackpad.

Information Reference List

Engineering Change Notices

None

Technical Information Bulletins

None

Product Support bulletins

None